BBYGS - MACHINE CLEANER-POLISH
- MSDS: BBYGS
- Manufacturer: DOALL COMPANY
- Product Name: MACHINE CLEANER-POLISH
- National Stock Number: 7930-00F007559
Product Identification
Product ID:MACHINE CLEANER-POLISH
MSDS Date:08/11/1986
FSC:7930
NIIN:00F007559
MSDS Number: BBYGS
Responsible Party
DES PLAINES, IL 60016
Emergency Phone: (312) 824-1122
Info Phone: (312) 824-1122
Preparer: R. R. ROGERS
Cage: 02637
Contractor
Telephone: 847-803-7366
Cage: 02637
Ingredients
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 5 - 15%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
AMMONIUM HYDROXIDE (SARA III)
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: 0.19%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
LPG (LIQUEFIED PETROLEUM GAS)
CAS: 68476-85-7
RTECS: SE7545000
Fraction By Weight: 4.0%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION, LIGHT
HEADEDNESS. IRRITATION OF THE LUNGS, RESPIRATORY SYSTEM, EYES, &
SKIN. INGESTION: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION, LIGHT HEADEDNESS.
IRRITATION OF THE LUNGS, RESPIRATORY SYSTEM, EYES & SKIN.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. KEEP WARM & QUIET. GET MED
ATT. EYES: REMOVE CONTACT LENSES. HOLDING EYE LIDS OPEN, FLUSH WITH
WATER FOR MIN. SKIN: WASH W/MILD SOAP & WARM WATER. AVOID USE OF
HARSH S OAPS & SOLVENTS. REMOVE SOAKED CLOTHINGIMMEDIATELY.
INGESTION: KEEP PERSON WARM & QUIET. GET MEDICAL ADVICE BEFORE
FURTHER ACTION TAKEN.
Fire Fighting
Flash Point:-123F
Lower Limits:1.9%
Upper Limits:9.5%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, FOG
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. IF IGNITED,
WATER FOG IS PREFERRED. WATER SPRAY CAN BE USED TO COOL CONTAINERS.
WEAR SCBA W/FULL FACE SHIELD IN FIRE AREA.
Unusual Fire/Explosion Hazard:USE EQUIPMENT OR SHIELDING AS REQUIRED TO
PROTECT PERSONNEL AGAINST VENTING, RUPTURING, OR BURSTING
EXPLOSIVELY. PRODUCT IS IN A PRESSURIEZED AEROSOL CAN.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES, VENTILATE SPILL AREA.
SOAK UP ON INERT ABSORBENT MATERIAL. SHOVEL INTO METAL CONTAINERS.
MOP WITH HOT WATER TO REMOVE RESIDUE LEFT AFTER ABSORBING.
Handling
Handling and Storage Precautions:DON'T STORE WHERE TEMPS COULD EXCEED
130F. DON'T PUNCTURE CAN OR STICK A PIN OR OTHER SHARP OBJECT INTO
VALVE AT TOP OF CAN.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING
VAPORS & INHALING THEM CAN BE HARMFUL OR FATAL.
Exposure Controls
Respiratory Protection:IF TLV EXCEEDED: NIOSH APPROVED SA RESPIRATOR.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP
PROLONGED SKIN CONTACT OR EYE CONTACT.
Work Hygienic Practices:WASH W/SOAP & WATER AFTER USE. AVOID PROLONGED
CONTACT W/SKIN & EYES. AVOID BREATHING VAPORS. DON'T SMOKE WHEN
SPRAYING.
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
Spec Gravity:0.98
Evaporation Rate & Reference:(BU AC = 1) >1
Solubility in Water:>10%
Appearance and Odor:SEMI-STABLE WHITE FOAMING SPRAY, FLORAL-AMMONIA
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:AS RECIEVED, PRODUCT WOULD BE AN IGNITABLE WASTE
W/AN EPA HAZARDOUS WASTE NUMBER OF D001. AFTER USE, PRODUCT
RESIDUES CAN BE HANDLED AS AN OILY WASTE UNDER LOCAL, STATE, &
FEDERAL REGULATIONS. DON'T I NCINERATE CANS NOR PLACE IN TRASH
COMPACTOR.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.